| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Interior | Section: Heating/Air Conditioning | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM000003FS0001X |
| Title: HEATING / AIR CONDITIONING: REAR BLOWER MOTOR: INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL BLOWER WITH FAN (REAR) MOTOR SUB-ASSEMBLY
(a) Install the motor with the 3 screws.
(b) Connect the connector.
2. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Standard)
3. INSTALL QUARTER TRIM PANEL ASSEMBLY RH (for Power Seat)
4. INSTALL REAR FLOOR MAT SUPPORT PLATE
5. INSTALL ROPE HOOK ASSEMBLY
6. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
7. INSTALL REAR DOOR SCUFF PLATE RH
8. INSTALL REAR FLOOR STEP NO. 1 COVER
9. INSTALL REAR FLOOR STEP NO. 2 COVER
10. INSTALL REAR SEAT CUSHION HINGE LOWER COVER RH
11. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Power Seat)
12. INSTALL REAR NO. 2 SEAT ASSEMBLY RH (for Manual Seat)
13. INSTALL SEAT TRACK BRACKET FRONT COVER INNER
14. INSTALL SEAT TRACK BRACKET FRONT COVER OUTER
15. INSTALL DECK BOARD BRACKET
16. INSTALL DECK BOARD REINFORCEMENT SUB-ASSEMBLY
17. INSTALL NO. 1 DECK BOARD SUB-ASSEMBLY
18. INSTALL ROPE HOOK ASSEMBLY
19. INSTALL LUGGAGE COMPARTMENT TRIM BOX
20. INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
|
|